ELM 327 V2.1 Specifications:
Model name: ELM327 OBD2 bluetooth
Type: code readers & scan tools
Output protocol: bluetooth
Color: black & white
Material : plastic
Voltage: 12V
Current: 45mA
Wave frequency: 38400Hz
Applicable scope: 5-10m / 16.4-32.8ft
Item size: 4.8 * 2.5 * 3.5cm / 1.89 * 0.98 * 1.37in
Item weight: 23g / 0.81oz
Package size: 8.8 * 8.8 * 4cm / 3.4 * 3.4 * 1.5in
Package weight: 48g / 1.69oz
ELM327 2.1 OBD2 Bluetooth Support 7 Kinds of OBDII protocols as follows:
Vehicle Coverage: Works on all OBD2 Vehicles.
1. SO9141-3 (5 baud init, 10.4Kbaud)
2. ISO14230-4 (5 baud init, 10.4 Kbaud)
3. ISO15765-4 CAN (11bit ID, 500 Kbaud)
4. ISO15765-4 CAN (29bit ID, 500 Kbaud)
5. ISO15765-4 CAN (11bit ID, 250 Kbaud)
6. ISO15765-4 CAN (29bit ID, 250 Kbaud)
7. KWP2000 5 10.4 Kbaud
Top 5 Reasons To Get Super MINI ELM327 Bluetooth V1.5:
1. Software Version: V2.1
2. Hardware Version: V1.5
3. Works with all OBD-II compliant vehicles
4. Wireless (Bluetooth)
5. Software included for Palm, PDA, Windows PC, Windows Smartphone
6. 1PCB PIC18F25K80 Chip is 4MHZ. Bluetooth Module is 24MHZ.
2PCB PIC18F25K80 Chip is 4MHZ. Bluetooth Module is 16MHZ.
7. It supports commands ATAL and ATPPS.
8. If you need double PCB with PIC18F25k80 ELM327 V1.5. You can buy it on this link:
ELM327 V1.5 Double PCB 25K80 Chip
This is our one PCB Board With Real PIC18F25K80, HW V1.5, SW V2.1
ELM327 Bluetooth V1.5 Support All 9 Kinds of OBDII protocols as follows:
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
ELM327 V1.5 Specifications:
Operating voltage: 12V, internal protection from short circuits/overvoltages
Nominal idle current: 45mA
Item Size: 3.2 * 4.7 * 2.3cm
Item Weight: 22g
Package Weight: 45g
ELM327 Functions:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13. Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status
18.Fuel Pressure
Package Including:
1pc x ELM327 Bluetooth obd scan tool interface
1pc x SW driver
1.It Supports Multi-Languages 13 Kinds.
Czech,Danish,German,English,Spanish,French,Croatian,Hungarian,Italian,Polish,Serbian,Turkish and russian
The Following Picture shows the SW run on Android Torque Phone:
The Following Picture shows the SW run on windows:
Reviews
There are no reviews yet.